3× Faster. Zero Lifts. Same Great Finish.

When VEMAC needed to stain a series of large tilt-up concrete wall panels, they faced the same problem many builders encounter: slow, expensive, and risky work at height. Setting up lifts, repositioning between panels, and sending crews up and down all day consumed time, labor, and budget.

Lucid Bots’ Sherpa Drone changed that.

In a pilot on a 400 sq. ft. panel, Sherpa Drone applied two full coats in just 13 minutes, compared to 44 minutes with a traditional man lift. The crew stayed safely on the ground the entire time.

Sherpa Drone reduced labor time by 70%, eliminated lift use, and proved that vertical finishing can be done faster, safer, and more efficiently.

Why Tilt-Up Matters Now

Tilt-up construction is experiencing a major resurgence, driven by the rapid growth of data centers, logistics hubs, and large-scale industrial buildings.

Developers and general contractors are choosing tilt-up because it’s faster to build, structurally durable, and cost-effective for massive footprints. However, the finishing process—especially staining and coating—remains one of the most time-consuming steps.

That’s where Sherpa Drone comes in. By automating coating at height, Sherpa Drone removes one of the last manual bottlenecks in large-scale concrete construction, helping crews meet the high-speed demands of modern industrial projects.

The Challenge

VEMAC’s teams pride themselves on quality. Their finishing standards demand smooth coverage, consistent color, and no missed areas. But on large tilt-up projects, production speed was limited by lift logistics. Each new panel required new setup, safety checks, and careful maneuvering—costing valuable time across an entire site.

With project timelines tightening and labor costs rising, VEMAC needed a faster, safer, and more scalable way to apply coatings.

The Sherpa Drone Solution

Sherpa Drone is Lucid Bots’ aerial work platform designed for large-scale exterior maintenance and finishing. It replaces lifts and scaffolding with an intelligent, tethered drone system capable of precise spraying, washing, and coating applications at height.

At VEMAC’s El Paso job site, a Sherpa Drone equipped with a stain sprayer module applied two coats of H&C Colortop concrete stain. Operated by a ground pilot and supported by a two-person crew, the drone maintained consistent coverage and uniform finish across the test panel.

The entire process—from takeoff to the final coat—took less than 15 minutes, with no workers leaving the ground.

The Results

The Sherpa Drone dramatically outperforms traditional methods in both efficiency and safety. It completes two coats over 400 sq ft 3.4× faster (13 minutes vs. 44 minutes) while eliminating the need for workers at height, making the process 100% safer. Setup and teardown times drop by 85%, and the drone’s coverage rate improves from 9 to 61 sq ft per minute, a 6.7× increase in productivity.

Safety and Efficiency in One Flight

Each Sherpa Drone flight keeps the entire crew safely on the ground. There are no harnesses, no OSHA lift paperwork, and no exposure to height-related risks.

Crews can focus on mixing, material prep, and quality checks while the Sherpa Drone handles the vertical work. This parallel workflow boosts overall site productivity and reduces downtime.

Real ROI in Minutes

With Sherpa Drone, VEMAC achieved:

• 65%+ reduction in labor hours per panel
• 100% elimination of lift rentals
• 70% reduction in total application time
  

Across a large project with dozens of panels, this performance translates into days of time saved and measurable labor cost reductions.

Why It Matters

For modern contractors, productivity and safety are the key drivers of profitability. Sherpa Drone enables both:

• Speed: Complete vertical coating work up to 3–5× faster
• Safety: Keep every worker on the ground
• Consistency: Smooth, repeatable coverage across every panel
• Flexibility: Swap payloads for painting, staining, washing, or inspection
  

VEMAC’s pilot showed that Sherpa Drone isn’t just a prototype—it’s a practical way to modernize how tilt-up and exterior finishing work gets done.

Looking Ahead

After the success of this pilot, VEMAC is exploring Sherpa Drone for additional applications including media blasting, surface prep, and protective coating. These operations share the same challenge: repetitive, at-height labor that slows projects down.

Sherpa Drone’s ability to automate these tasks at scale positions it as a key tool for the next generation of construction and maintenance workflows.

See It in Action

Ready to skip the lifts?‍

Schedule a live demo and see how Sherpa Drone can cut your labor time in half—or better.

Lucid Bots successfully tested its new application sprayer module to protect the concrete facade at Alcorn State Stadium’s facade in a fraction of the time, validating a safer, faster, and more cost-effective approach to concrete and building envelope protection.

300%  more efficient than traditional methods.
‍

80% cost savings vs. traditional methods.

‍

Overview

At Jack Spinks-Marino Casem Stadium in Lorman, Mississippi, Lucid Bots partnered with contractor FlyByShine to test its next-generation sprayer module designed for drone-based drone-based water repellent application. Using PROSOCO’s industry leading water repellent, Siloxane WB Concentrate, the project demonstrated how Lucid Bots’ technology can transform large-scale concrete protection.

“By the time you scaffold a building like this and put the product on, work through all of any kind of tweaks that need to be done...I would say it’s a lot faster, 20 times”
— Bill Daniel, Prosoco

The Challenge

Traditional Methods Are Too Slow, Risky, and Expensive

Waterproofing stadiums and other vertical concrete assets has always been a costly and time-consuming process. Scaffolding or lifts must be rented and assembled, and workers are sent up as high as 90 feet in the air. This increases liability, slows down timelines, and often discourages facility managers from performing necessary maintenance.

The Solution

Lucid Bots’ Sprayer Module Proves Its Value

Lucid Bots deployed its Sherpa drone with the new application sprayer module to apply Prosoco’s siloxane-based sealer directly to the stadium facade. Partnering with Fly By Shine for on-site operations, Lucid demonstrated that thousands of square feet could be waterproofed in a single day—without scaffolding, lifts, or worker risk at height.

Key Outcomes:

• 4x Faster than traditional methods
  
  
• 80% Cost Savings vs. scaffolding and lifts
  
  
• Safer by keeping crews on the ground
  
  
• Consistent, Professional Finish meeting manufacturer standards
  
  

Customer Validation

FlyByShine’s team provided field feedback during the test and confirmed the commercial potential of the solution:

“Before another contractor could even get scaffolding up, we were already done. The simplicity of what we just did is shocking.”
— Ric McCluskey, Owner, Fly By Shine

“It’s really safe. Nobody is 90 feet in the air — the drone does the work.”
— John Young, Prosoco

Looking Ahead

This successful trial confirmed that Lucid Bots’ sealing solution is ready to move into beta with select partners. The company is packaging the module into a Sealing Kit including payload, pump, regulators, hose, and intuitive software, enabling contractors to deliver faster, safer, and more profitable sealing jobs.

Key Takeaway: Lucid Bots is redefining infrastructure maintenance. By eliminating scaffolding and lifts, reducing costs, and improving safety, the new sprayer module empowers contractors like FlyByShine to take on projects once considered too complex, costly, or risky.

With the rise of new technologies and sciences, it's not surprising that many people are hesitant about embracing drones for their business needs.

After all, we've been there before when computerization was first introduced to the business space. But what if you're one of those who are still on fence? Maybe you're reluctant. I mean, drones are new and maybe a bit daunting...

The Lucid Bots cleaning drone can take your business to the next level, and after you read this blog post, any doubts will be cleared up before tomorrow morning rolls around again.

But don't just take our word for it. Take it from one of our valued customers, Ryan Godwin, owner of Godwin Cleaning Services, an exterior cleaning business servicing commercial and residential properties.

Ryan Godwin had a similar hesitation when it came to using drones to help his business. "I mean, you know not and I was really skeptical. In the beginning, of course, because I didn't know much about it. And it took me a while to decide to pull the trigger." Godwin Cleaning Services finally did pull the trigger, and now, it’s paying off in a big way.

After using the drone, Godwin knew that a Lucid Bots cleaning drone would become a game changer for his business. “I knew I had to incorporate it into my business." He added, "I bought this and you know, I've had it for what a month now. And I've already executed like four jobs with it for big names.” 

Lucid Bots cleaning drone has been a game changer for many industry professionals, and for most, it’s considered their secret weapon. “I'm glad it's my secret weapon.” said Godwin, “it's the game changer that I needed to, really, really push it.”

Truthfully, we succeed when our customers succeed. That’s why we go through extensive testing and development to ensure that our drones are effective and profitable for our customers. “But I'm just gonna tell you now. And not just because y'all are the manufacturers of it. I mean, it's probably the best purchase I've made for my business.”

Additionally, our cleaning drones have cut down the time it takes to complete cleaning jobs the traditional way by increasing efficiency by 80%. “If I was using the traditional lift I mean, this is a two three day project.” Said Godwin. “I've actually been counting my cleaning time. Total cleaning time. It's been about four hours today.”

Lucid Bots was founded on one key principle: safety. Slips, trips and falls are the number one cause of injury on a job site. Cleaning drones are making it possible to reduce liability and increase worker safety by 95%. “I'm not hanging off a lift, you're still spraying. I'm just not hanging off a lift brand. You know, the only difference is I'm safer on the ground.” Said Godwin.

It also helps that cleaning drones are really cool. “I'm telling you, I've had an audience all day.” said Godwin.

Drones are changing the world, but Lucid Bots is leading by example. We have created a smarter way for professionals in cleaning industries to do their jobs - safer and faster than ever before.

"It's a game-changer!"

Curious about how you can take your business to the next level? Just contact us by filling out our contact form or by calling us at (980) 498-1894  .